A vacuum bleeder is a tool that is used to remove air bubbles or air pockets from a vehicle's brake system. It is an essential tool for anyone who wants to properly maintain and bleed their brakes.

When you press the brake pedal, hydraulic pressure is created by the master cylinder to stop the vehicle. However, over time, air can enter the brake lines, which can lead to a spongy or ineffective brake pedal. This is where a vacuum bleeder comes in.

A vacuum bleeder kit typically consists of a vacuum pump with a reservoir, tubing, and adapters. The pump is used to create a vacuum in the brake system, which in turn draws out the air bubbles or air pockets. The pump can be either electric, pneumatic or a hand operated. The reservoir is used to store the brake fluid that is being drawn out, while the collection bottle captures any excess brake fluid.

Using a vacuum bleeder is a straightforward process. First, you need to locate the brake bleeder valve on each brake caliper or wheel cylinder. The valve is usually a small fitting with a rubber cap. Once you have located the valve, attach the vacuum bleeder hose to it. Then, open the valve and use the vacuum pump to create a vacuum. As the vacuum is created, the air bubbles or air pockets will be drawn out of the brake system and into the collection bottle. You should repeat this process on each brake caliper.

Whether you need to bleed your brakes or a hydraulic clutch, our vacuum bleeder tools make quick bleeds or full fluid replacements so easy. Just turn it on and watch the fluid flow hands free. Leaves you free to do other things, like make sure the reservoir doesn't run dry. Set up is easy. Get yours today. Vacuum bleeding has never been easier.