Home / How to Bleed Brakes by Yourself in 30 Min (DIY Guide)

How to Bleed Your Brakes by Yourself in 30 Minutes 

The Complete DIY Guide

Get Your Hands-Free Brake Bleeder Kit Now

30-day money-back guarantee included 

If you have ever attempted to bleed vehicle brakes using the traditional two-person pedal pumping method, you know how frustrating it is: you need an assistant, communication errors can suck air back into the lines, and brake fluid invariably ends up on your garage floor.  Fortunately, a vacuum brake bleeder lets you flush and bleed your entire brake system single-handedly in under 30 minutes. Here is the exact step-by-step process to get a rock-solid brake pedal every time.

Tools and Materials Needed

Air Zapper Vacuum Brake Bleeder Kit (includes vacuum pump, fluid reservoir jar, and universal tapered adapters)

Fresh manufacturer-recommended brake fluid (DOT 3, DOT 4, or DOT 5.1 — check your master cylinder cap)

Box wrench / flare nut wrench matching your bleeder screws (typically 8mm to 11mm)

Floor jack, jack stands, and wheel lug wrench

Clean shop rags and safety glasses
Alt image
Air Zapper Pro One Man Vacuum Brake Bleeder Kit with Case
Air Zapper Brake Bleeder Pro EVA Case
Air Zapper Brake Bleeder Pro Pump
Air Zapper Brake Bleeder Pro Kit Fluid Tank
Air Zapper Brake Bleeder Pro Kit Bleed Screw Connector
Air Zapper Brake Fluid Tester
Air Zapper Brake Fluid Tester Indicators
Air Zapper Brake Fluid Tester Probes
Air Zapper Brake Bleeder Pro Pump and Fluid Reservoir
Air Zapper Brake Bleeder Vacuum Connector with Tubing

Vacuum Brake Bleeder Pro Kit

$119.99

Free USA Shipping
 The Air Zapper Vacuum Brake Bleeder Pro Kit has everything you need to do a professional bleed to keep your brake system air and moisture free.


It is the easiest to use vacuum brake bleeder kit on the market today, because...

    • There are no hand pumps or air compressors required
    • You just turn on and adjust the speed and the vacuum pump brake bleeder works to draw the air out and fluid in
    • You simply supervise the operation
    • You can monitor the reservoir level without stopping the bleed
    • You can easily do a quick bleed or a full fluid replacement


    Get yours today


    Your neighbor is waiting to borrow it


    Includes:

      • 120V Heavy duty brake bleeder pump (8 L/Min flow rate with variable speed control knob
      • Fluid holding tank
      • Interconnecting tubing
        • Connects the vacuum pump to the fluid holding tank and to your brake system.
      • Electronic brake fluid tester- measures moisture content in you fluid
      • EVA carrying case for secure storage

    Specifications:

      • Vacuum Pump- 120 volts, 60 Hz, 10.2 Watts . Speed control knob on the pump. The plug is a USA/ Canada type plug, so adapters and transformers may be required in other countries.
      • Max Vacuum Pressure- 12.5 in Hg
      • Fluid Tank Capacity- 16 ounces
      • Pump- 8 Liters/ Min.


    Professional Vacuum Brake Bleeder Kit
    Quantity

    Step 1: Prep the Master Cylinder Reservoir

    1. Park your vehicle on level ground, engage the parking brake, and safely raise the vehicle onto jack stands.
    2. Clean the master cylinder cap to prevent dirt from contaminating the hydraulic system.
    3. Remove the cap and inspect fluid level and color. If the old fluid is dark or contaminated,  suction out the old fluid from the reservoir before refilling with fresh brake fluid to the 'MAX' line.
    *Pro-Tip:* Never let the master cylinder run dry during the bleeding process, as this introduces air into the ABS module.

    Step 3: Bleed the Calipers in the Correct Sequence

    Always bleed brakes starting with the wheel furthest from the master cylinder:
    • Step A: Passenger Rear (Right Rear)
    • Step B: Driver Rear (Left Rear)
    • Step C: Passenger Front (Right Front)
    • Step D: Driver Front (Left Front)

    Alt image

    Step 5: Final Check and Test Drive

    1. Verify all bleeder screws are torqued properly and reinstall dust caps.
    2. Check that the master cylinder fluid level sits squarely at the 'MAX' mark.
    3. With the engine off, press the brake pedal firmly. It should feel firm and high, with zero sponginess.
    4. Perform a low-speed test drive in your driveway or neighborhood to confirm firm stopping power.

    Step 2: Assemble Your Air Zapper Vacuum Bleeder

    1. Connect the suction hose from the Air Zapper  pump to one of the ports on the fluid reservoir jar.
    2. Attach the second hose to the other port of the fluid reservoir jar.
    3. Ensure all hose connections are seated tightly to maintain airtight vacuum suction.

    Step 4: Draw Out the Air Bubbles and Old Fluid

    1. Remove the rubber dust cap on the bleeder nipple and place your box wrench over the valve.
    2. Push the Air Zapper silicone adapter firmly over the bleeder nipple.
    3. Turn on the Air Zapper vacuum pump to build  vacuum pressure in the reservoir jar.
    4. Slowly turn the bleeder screw 1/4 to 1/2 turn counterclockwise. 
    5. Watch the transparent tube: old dark fluid and trapped air bubbles will flow smoothly into the collection jar.
    6. Once the fluid runs crystal clear and bubble-free, tighten the bleeder screw securely before releasing vacuum pressure.
    7. Disconnect the silicone adapter from the bleeder screw and turn off the vacuum pump

    8. Top off the master cylinder with fresh fluid and move to the next wheel and repeat the above steps.

    Upgrade Your Garage Today

    Stop waiting on an assistant or paying $150+ at a repair shop. The Air Zapper Vacuum Brake Bleeder Kit gives you professional-grade results at home. Shop our Air Zapper Brake Bleeder Kits!